New Product Active Autowerke F Chassis N55 Upgraded Charge Pipe - F30Driver




Welcome to the F30Driver forums. F30Driver is the premiere website for the next generation BMW 3 series with interactive forums, photo galleries, and technical information for BMW enthusiasts. If you are looking to talk about your F30 Sedan, F31 Touring, F32 Coupe or F33 Cabrio -- F30Driver is the place for you!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   F30Driver > BMW F30 Forums > General F30 Sedan / F31 Wagon / F32 Coupe / F33 Cabrio

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 06-15-2017, 06:44 PM   #1
mike@x-ph.com
Sponsor
 
Join Date: Mar 2014
Location: Las Vegas
Posts: 1,563
My Ride: FBO 07 e92 335i
Talking New Product Active Autowerke F Chassis N55 Upgraded Charge Pipe


ACTIVE AUTOWERKE BMW F-CHASSIS N55 CHARGE PIPE

Order Link
https://www.x-ph.com/active-autowerke-f-chassis-n55-upgraded-charge-pipe/

2012+ - BMW F3X 335i, 435i, M235i and M2 with N55 engine

Active Autowerke is familiar with some of the issues that 2012 and newer N55 BMW 335i, 435i, M235i and M2 owners experience even running with the factory BMW boost.

The BMW N55 utilizes an all plastic construction for the factory charge pipe.
This charge pipe will eventually break, it is just a matter of time and when. Whenever the factory charge pipe break at the plastic seam, the engine immediately senses a huge vacuum leak where the engine ECU counters by sending the engine into a LIMP MODE condition.
Usually, the car's performance will feel dimished and lack luster as if running without a proper firing cylinder.

The Active Autowerke N55 Charge Pipe is a designated product designed from inception to cure and eliminate this problem on your BMW.
Constructed from all aluminum makes this charge pipe almost indestructible.
The connection to the throttle body is a CNC machined part to duplicate the factory fit as well making a tight, reliable seal.

Owners of BMW with the N55 engine understands that additional power can be reliably maintained with the use of Water/Methanol injection as an added feature. However, the N55 current does not have a reliable source to accommodate the application of a Water/Methanol nozzles.

The Active Autowerke N55 Charge Pipe has a proper proviison for this specific application. A boss with two separate ports are provided upstream where the injected mix of water/methanol can properly atomize before entering the engine. The thread depths for the water/metahnol nozzles are also checked to allow for a proper spray pattern without hitting the inside walls of the threaded holes.

The BMW N55 engine does not utilize external diverter valves like it's N54 predecessor. Rather, the BMW N55 has diverter valves that are built inside the engine turbo compressor housings and no in the charge pipe. As such, there are no provisions to add larger BOVs.

KEY FEATURES:

Specific design to correct a problem
Consistent diameter tubing for increased performance
Increased throttle response and decrease throttle lag
CNC machined throttle housing for a poper seal
Retains factory BMW O-Ring seal
Provision of raised boss for 2 Water/Methanol nozzles
BLACK powder coated for that OEM look
High quality silicone couplers and stainless clamps are included

NOTE:

The factory throttle clip and O-ring are not included with the N55 Charge Pipe

****NOT COMPATIBLE WITH XI MODELS

Order Link
https://www.x-ph.com/active-autowerke-f-chassis-n55-upgraded-charge-pipe/





mike@x-ph.com is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -5. The time now is 09:23 AM.



Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
(c) 1999 - VerticalScope Inc. All rights reserved.